SBC-C41-pITX
SBC-C41-pITX User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2021 SECO S.p.A.
68
5.2
Accessories
SECO can offer various accessories in completion of SBC-C41-pITX functionalities
5.2.1
Accessories kit CABKITC41
This accessories kit includes the following items
•
Dual USB 2.0 Type A adapter with standard PC mounting plate. Can be used to carry out the signals of internal USB ports #4-
#5 (connector CN18) to standard USB 2.0 Type A receptacles
•
Front Panel I/O board V995, which allows the integration on a panel of an optional enclosure of two Audio jacks (Earphone and
Mic in), Reset Button, Power button and two LED (for SATA activity and Power Status of the board itself).
For fixing of the front panel I/O board to the external enclosure
’
s panel, the module is equipped with two brackets and screws for the
fixing of the brackets to the module.
•
Cables for connection of the Front Panel I/O board to SBC-C41-pITX board.
Connection cable CV-836/30 is needed for audio functionalities; it has to be connected to SBC-C41-pITX board
’
s connector CN7 and to V995 module
’
s connector CN2.
Connection cable CV-837/30 is needed for connection of power and reset pushbuttons and SATA / power LEDs; it must be connected to SBC-C41-pITX board
’
s connector CN12
and to V995 module
’
s connector CN1.
•
Serial adapter cable CV-904/20. It can be used to carry out the signals of RS-232/RS-422/RS-485 signals available on the connector CN19 to two standard DB-9 male
connectors.
•
SATA power cable, for connection of power rails of external SATA disks / SSDs to internal SATA power connector CN10.
