2.2
Technical specifications
SOC
Intel
®
Atom x7-E3950, Quad Core @1.6GHz, 2MB L2 Cache, 12W TDP
Intel
®
Atom x5-E3940, Quad Core @1.6GHz, 2MB L2 Cache, 9.5W TDP
Intel
®
Atom x5-E3930, Dual Core @1.3GHz, 2MB L2Cache, 6.5W TDP
Intel
®
Pentium
®
N4200, Quad Core @1.1GHz, 2MB L2 Cache, 6W TDP
Intel
®
Celeron
®
N3350, Dual Core @1.1GHz, 2MB L2Cache, 6W TDP
Intel
®
Celeron
®
J3455, Quad Core @1.5GHz, 2MB L2Cache, 10W TDP
Intel
®
Celeron
®
J3355, Dual Core @2.0GHz, 2MB L2Cache, 10W TDP
Memory
32-bit Single-/Dual-/Quad-Channel LPDDR4 soldered onboard, up to 2400 MT/s
Max memory size 8GB
Graphics
Integrated Intel
®
HD Graphics 500 series controller with up to 18 Execution Units
Three independent display support
HW decoding of HEVC(H.265), H.264, MVC , VP8, VP9, MPEG2, VC-1, WMV9,
JPEG/MJPEG formats
HW encoding of HEVC(H.265), H.264, MVC, VP8, VP9 and JPEG/MPEG formats
Video Interfaces
HDMI connector
Optional DP++ connector (combo with HDMI)
LVDS connector
Video Resolution
HDMI, support 4Kx2K without HDCP @ 30Hz as specified in HDMI 1.4b
LVDS, resolution up to 1920x1200 @ 60Hz
DP++, resolution up to 4096x2160 @ 60Hz
Mass Storage
Optional eMMC 5.0 drive on-board
SATA Gen3 7p M connector
SSD M.2 Socket 2 Key B lot, size 2242 / 3042 (excludes WWAN modules)
microSD Card slot (combo with miniSIM slot)
Networking
2x Gigabit Ethernet connector
WWAN (modem) M.2 Socket 2 Key B 2242 / 3042 slot (excludes SSD interface)
Connectivity M.2 Socket 1 Key E 2230 Slot for WiFi+BTLE modules
USB
USB 3.0 Dual Type-A connector
Internal USB 2.0 Dual pin header
Audio
HD Audio Codec
Line Out + Micr S/PDIF Out interfaces on internal pin header
Serial Ports
2 x RS-232/RS-422/RS-485 Serial ports on internal pin header
Other Interfaces
miniSIM slot for M.2 modems (combo with microSD slot)
8 x GPI/Os connector
FAN connector
Switch / LED Front Header connector
I2C + INT# + RST# signals for I2C Touch Screen controller on LVDS connector
Optional TPM 2.0 on-board
Power supply voltage:
+12V
DC
± 5%
Cabled coin cell battery for RTC
Operating temperature **:
0°C ÷ +60°C (Commercial temperature)
-40° ÷ +85°C (Industrial temperature)
Dimensions
: 72 x 100 mm (2.83
”
x 3.93
”
).
Supported Operating Systems:
Microsoft
®
Windows
®
10 Enterprise (64 bit)
Microsoft
®
Windows
®
10 IoT Core (32- /64-bit)
Linux 64-bit
Yocto (64-bit)
** Measured at any point of SECO standard heatspreader for this product,
during any and all times (including start-up). Actual temperature will widely
depend on application, enclosure and/or environment. Upon customer to
consider application-specific cooling solutions for the final system to keep the
heatspreader temperature in the range indicated. Please also check
paragraph 5.1
