Installation:
Overview:
Specifications:
Features:
SS-075CQ / SS-075Q /
SS-075C-PEQ
Emergency / Push-to-Exit
Button
Manual
Please read this manual carefully before you begin the installation
1.
Find appropriate location to mount the button.
2.
Run 2 wires to the button mounting location from the source device you are trying to control.
3.
Connect the 2 wires to the back of the button:
a.
SS-075CQ or SS-075C-PEQ: Either NO/COM or NC/COM
b.
SS-075Q: NO/COM
4.
Screw the button down in the mounting location.
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800
Email: [email protected]
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal service
for 1 year from the date of sale to the original customer.
NOTICE:
The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the
right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks are the property of
SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2019 SECO-LARM U.S.A., Inc. All rights reserved.
®
PITSW1
MI_SS-075xxxx_190213_ML.docx
Model SS-075C-PEQ
SS-075CQ
SS-075Q
Contact
NO or NC (selectable)
momentary contact
N.O.
(push-to-close)
Switch Rating
1.0A@12VDC
0.5A@12VDC
Operating voltage
12~24 VDC
Terminal Type
Screw Terminal
Color Off-white
Dimensions 3"x
15
/
16
"x
5
/
8
" (76x23x15 mm)
SS-075CQ, SS-075C-PEQ
SS-075Q
N.O. N.C.
COM
COM
N.O.
Large button has "Emergency" printed on face*
NO or NC (selectable) momentary contact**
Contact rated 0.5A@12VDC (1.0A@12VDC for
SS-075C-PEQ)
Screw terminals
Off-white
Dimensions: 3"x
15
/
16
"x
5
/
8
" (76x23x15 mm)
*SS-075C-PEQ has 3 labels included: choose between "Emergency", "Push to Exit", and
"Presione Para Salir,"
**SS-075Q is N.O. (push-to-close) momentary contact only
