Screw-Terminal
Surface-Mount Contacts
SM-200Q/W / SM-200Q/BR
SM-300Q/W / SM-300Q/BR
Manual
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800
Email: [email protected]
®
PITSW1
Order Part# 763-200-1%
MI_SM-x00Q_210414_ML.docx
•
Surface-mount magnetic contacts
•
Screw mount using side tabs
•
Terminal cover provided (required for all
applications)
•
ABS plastic case has lip to prevent wires from
accidentally touching metal mountings and slotted
mounting holes for easier gap adjustment
•
Contact reed switch is SPST, deactivated rhodium
on gold underplating for a longer expected life
•
For closed loop circuits (SM-200Q only)
•
For open loop circuits (SM-300Q only)
•
3
/
4
" (19mm) Gap (SM-200Q only)
•
1
/
2
" (13mm) Gap (SM-300Q only)
•
Lifetime limited warranty
Parts List
10x
Contact switches
10x
Magnets
10x
Terminal covers
1x
Manual
NOTICE:
The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also
not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2021 SECO-LARM U.S.A., Inc. All rights reserved.
Specifications
Overview
SM-200Q/BR shown
Model
White
SM-200Q/W
SM-300Q/W
Brown
SM-200Q/BR
SM-300Q/BR
Loop type
Closed loop
Open loop
Electrical connection
N.O. (SPST)
N.C. (SPST)
Operation gap
3
/
4
" (19mm)
1
/
2
" (13mm)
Connectors
Screw terminals
Material
Case
High-impact ABS plastic
Contacts
Deactivated rhodium on gold underplating
Contact rating
1.0A@10VDC (max.)
10W (max.)
Operating temperature
-15°~160° F (-25°~70° C)
Switch cycles
50 Million (0.1mA@5VDC)
Dimensions
Switch
2
1
/
2
″x
9
/
16
″x
1
/
2
″ (63.5x14x13 mm)
Magnet
2
1
/
2
″x
1
/
2
″x
1
/
2
″ (63.5x13x13 mm)
Magnet type
Ferrite
Protected side of the door/window.
GND
N.O
.
Hinged side
of door
Alarm
Control
Panel
Installation
Please read the manual carefully before you begin the installation.
1.
Mount the contact above the door or window on the frame. For doors, ensure that the mounting is farthest
from the hinged side of the door.
2.
Connect the two wires to the alarm control panel.
3.
Mount the magnet on the door/window so that it will face the contact. Be sure that the gap between the
contact and magnet does not exceed
3
/
4
" (19mm) for the SM-200Q or
1
/
2
" (13mm) for the SM-300Q.
LIMITED LIFETIME WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for the lifetime of the product. SECO-LARM’s
obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. Under no circumstances will SECO-LARM be responsible for any
costs or charges for removal, installation, or reinstallation. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or
alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects
in material and workmanship. The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to repair or replacement only, at SECO-LARM’s option. In no event shall
SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any kind to the purchaser or anyone else. This lifetime limited warranty is for products
sold and installed in the United States and Canada. For all other countries the warranty is 1 (one) year.
California Proposition 65 Warning:
These products may contain chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information, go to
www.P65Warnings.ca.gov
.
