®
What's Included with the Kit:
Basic DIY Installation Using Micro USB Power:
Room Occupancy Monitor
Quick Guide Manual
1x Sensor
1x 1-Room Indicator
1x Indicator decals
2x 12" USB Power cords
1x Manual
Overview:
Pairing button
Micro USB Power input
PIR Sensor
Phototransistor
Phototransistor ON/OFF jumper*
LED ON/OFF jumper*
PIR ON/OFF jumper*
Sensor
See full Manual for terminal block wiring instructions
Service button (1-Room Indicator) / Ch2 Pairing button
(2-Room Indicator)
Ch1 Pairing button
Micro USB power input
Antenna
Buzzer
(1-Room Indicator only)
Buzzer ON/OFF jumper* (1-Room Indicator only)
Indicators
See full Manual for terminal block wiring instructions
The Room Monitor Kit (RM-R100-KB1Q) is pre-learned and ready to go right out of the box. Just mount and connect to
power via the included micro USB cable and any USB adapter. Follow the steps below for a basic installation.
1.
Find a location to mount the Sensor/Indicator. Keep in
mind that the included micro USB cord is 12" long.
2.
Use a paper clip and program as needed. See
Setting a
Reminder Time
on pg. 2.
3.
Apply double-sided mounting tape to the back of the
Sensor/Indicator and mount.
4.
Connect the micro USB plug to the Sensor/Indicator
and connect to power.
Power
source
12"
(30cm)
For complete instructions, please see the
full Manual on the SECO-LARM website.
*Phototransistor jumper's default is OFF, other jumpers' default is ON
