background image

ENFORCER

 

Ball-Mount Indoor/Outdoor IR Camera Manual

ENFORCER

 

Ball-Mount Indoor/Outdoor IR Camera Manual

ENFO

RCER

SECO-LARM

SECO-LARM

SECO-LARM

SECO-LARM

SECO-LARM

®

®

®

®

®

VIDEO

®

iMUIRVandalBallMntLargeCam.pmd

•  Check that the camera is powered up.
•  Check that the monitor is powered up.
•  Check that the video cable connecting the camera to the monitor is connected properly.

•  Clean the lens (using a soft, clean cloth).
•  Check that the light source is adequate.

•  Adjust the monitor’s contrast knob.
•  Change the position of the camera.

•  Change the position of the camera.

•  Check “Focus” adjustment.
•  Change the position of the camera.

•  Check that the correct power supply is in use.

The screen is blank

The screen image is dim

The screen image has poor
contrast

The screen image flickers

The screen image is distorted

The camera case is hot

TROUBLE SHOOTING

SECO-LARM

®

 U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA  92606
Tel: 800-662-0800 / 949-261-2999   Fax: 949-261-7326

Website: www.seco-larm.com
E-mail: [email protected]

PICSN4

®

IMPORTANT

    

Users and installers of this product are responsible for ensuring this product complies with all

national, state, and local laws and statutes related to monitoring and recording audio and video signals.

SECO-LARM

 

will not be held responsible for the use of this product in violation of any current laws or statutes.

WARNING

    

Stop using the camera if you see a malfunction like smoke or unusual heat, as it could cause fire or

electric shock. Do not open the case of this device, as there are no field-serviceable components inside.

FCC COMPLIANCE STATEMENT

  

 

Information to the user: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.

NOTICE

The information and specifications printed in this manual are current at the time of publication.  However, the SECO-LARM
policy is one of continual development and improvement.  For this reason, SECO-LARM reserves the right to change
specifications without notice.  SECO-LARM is also not responsible for misprints or typographical errors.

Copyright © 2008 SECO-LARM U.S.A., Inc.  All rights reserved.  This material may not be reproduced or copied, in whole
or in part, without the written permission of SECO-LARM.

WARRANTY

  

This SECO-LARM product is warranted against defects in material and workmanship while used in

normal service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s
obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to
SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only,
at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.

EV-122C-DVAVQ

Color Ball-Mount Vandal-Resistent,

Indoor/Outdoor IR Dome Camera

with Varifocal Lens, 36 LEDs,

and Split Glass Technology

MANUAL

Note: Products with model number that ends with “Q” or have a round green “Q” sticker represents RoHS compliant

Reviews: