Manual
* Special order only (E-964-D390Q is a multi-frequency version).
SECO-LARM
12
NOTICE:
The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2016 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in
part, without the written permission of SECO-LARM.
SECO-LARM
®
U.S.A., Inc.
U.S.A., Inc.
U.S.A., Inc.
U.S.A., Inc.
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
Website: www.seco-larm.com
E-mail: [email protected]
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that
such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or
property damages of any kind to the purchaser or anyone else.
file:MI_E96x-DxxxGQ_160218.pmd
PITSW3
Also available from SECO-LARM:
Twin Photobeam Detectors
®
Reflective
Photobeam Sensor
Hooded Reflective
Photobeam Sensor
Flush-Mount
Photobeam Sensors
• 2, 4, 6, 8 or 10 Beams available
(10 Beams - curtain sensor only)
• Curtain sensor - Up to 50ft (15m)
• Barrier sensor - Up to 393ft (120m)
• Weatherproof
• Adjustable interruption time
• Available with 45ft (14m) or
35ft (11m) range
• Weatherproof
• Mounting hardware included
• Reflector included
• UL325 - 2016 compliant
• Available with 50ft (15m) or
33ft (10m) range
• Weatherproof
• Polarized version available
• Round reflector included
• UL325 - 2016 compliant
• Available with reflective beam and
16ft (5m) range or through-beam
and 33ft (10m) range
• Adjustable alignment angle
• Mounts to a single-gang box
®
Note: All above models are also available as non-ETL compliant versions.
E-960-D90GQ
90 ft. (30m)
190 ft. (60m)
E-960-D190GQ*
190 ft. (60m)
390 ft. (120m)
E-960-D290GQ*
290 ft. (90m)
590 ft. (180m)
E-964-D390GQ*
390 ft. (120m)
790 ft. (240m)
Model #
Outdoor Range
Indoor Range
Curtain / Barrier
Sensors
Twin Photobeam
Sensors
• Up to 390ft (120m) range
• Laser-beam alignment
• Weatherproof
• Anti-frost system
• Adjustable response time
Quad Photobeam
Detectors
• 4 Models available - up to
660ft (200m) range
• Weatherproof
• 12~24 VAC/VDC
• Laser-beam alignment