5
4
Operation
•
Connect the heat press to a 230 V power socket using the connection cable
supplied.
•
Switch on the press with the red rocker switch.
•
After switching on the press heats up automatically to the set temperature,
which can be changed at any time on the temperature control knob. A small
light on the temperature control knob illuminates as long as the press is
heating up.
•
The contact pressure can be regulated by increasing or reducing the lever
travel by rotating the knurled nut on the press lever.
•
As soon as the press is heated up completely you can stating making the first
transfers. For this purpose select the desired pressing time on the time control
knob. The timer starts running as soon as the press is closed with the press
lever. After expiration of the set time a warning signal sounds.
Temperature control knob
Time control knob
Note
Note
Note
Note:::: The heat press has to cool down after use, which can take some time.
The heat press has to cool down after use, which can take some time.
The heat press has to cool down after use, which can take some time.
The heat press has to cool down after use, which can take some time.
Note: Please note that the
Note: Please note that the
Note: Please note that the
Note: Please note that the heat press
heat press
heat press
heat press is not designed for continuous operation
is not designed for continuous operation
is not designed for continuous operation
is not designed for continuous operation,,,,
so do not leave the press switched on when it is not in use.
so do not leave the press switched on when it is not in use.
so do not leave the press switched on when it is not in use.
so do not leave the press switched on when it is not in use.
