Starting up the device • 39
17
-1
0-
05
-3
53
-0
02
g_
10
-2
02
0
B
5.5 Setting the date and time
When you start up the device for the first time, you first need to set date and
time.
1. Ensure that the measuring mat – if the measuring mat is present– is cor
-
rectly suspended in the magnetic catch of the monitor
measuring mat in the magnetic catch
2. Connect the device to the power supply.
3. Press the ON/OFF button of the monitor.
The LED of the button is white.
The initial start screen appears.
4. Enter the current date:
a) Press the
input field
b) Use the keypad
: Enter current date
c) Press the
button: Confirm entry
5. Enter the current time:
a)
Press the
input field
b) Use the keypad
: Enter current time
c) Press the
button: Confirm entry
6. Press the
button.
7. Continue operating the device – you have the following options:
►
Leave device switched on (recommended):
►
Perform measurements using the power supply:
►
