10
9. What to do if alarms were triggered
1. Immediately ensure for fresh air supply by opening doors and windows!
2. Press the TEST/SILENCE button, to mute the alarm tone. This prevents panic!
3. If possible, turn off all combustion devices and gas supplies!
4. Call the emergency-call when people complain about symptoms of poisoning, e.g. headaches
or nausea (
see chapter 1
)!
5. Pay attention to all the people in the room and allow the immediate leaving the room. Make
sure that nobody remains behind! Also make sure that no one can return or move away from
the open door or open windows until the rescue forces have arrived. The alarm must not be
deactivated during this time!
6. Do not restart the switched-off combustion device until it has been checked by an expert!
7. Check each combustion device! If no specialist or verification device is available, follow the
manufacturer’s instruction and refer directly to the manufacturer of the defective device.
Note:
Even if the CO alarm detective does not indicate any danger after venting, it is advisable to
determine the cause of the alarm or the source of the carbon monoxide! There is danger to life!
the sudden loud alarm sound
Function-Test
To test the alarm, press the TEST/SILECNE button. The test
alarm ends by releasing the TEST/SILENCE button.
Note:
Test the device weekly! If the test alarm is not executed as
described, replace the CO alarm detector immediately!
