3
Required radio, motor and battery
Radio equipment:
•
Minimum 4-channel radio system
•
4 digital mini servos, recommended JR PROPO DS 385
•
2 servo extension 300mm, for elevator and rudder servos
•
4 servo extension 100mm, for aileron’s servos
Recommended electric motor for best performance:
•
Hacker A30-12L + X40 cont APC 13 x 6.5 E
•
Hacker A30-14L + X40 cont APC 14 x 7 E
Recommended Li-Po battery pack for best performance:
•
FlightPower EVO 25 1800mAh 3S.….for unlimited 3D
•
FlightPower EVO 25 2170mAh 3S…..for everything
•
FlightPower EVO 25 2500mAh 3S…..for duration and precision
Additional required item, tools and adhesives
Tools:
•
Drill
•
Drill bits: 1,5mm
•
Phillips screwdriver
•
Hobby knife
•
Masking tape
•
Soldering iron
Adhesives:
•
thin CA
•
medium CA
Warning
This RC aircraft is not a toy!
If misused, it can cause serius bodily harm and damage to property.
Fly only in open areas, preferably in official flying sites, following all instructions included with
your radio and motor.
Before starting assembly
Before starting the assebly of your KatanaS 30E, remove each part from its bag and protection for a
prior inspection. Closely inspect the fuselage, wing panels, rudder, and stabilizer for damage. If you
find any damage or missing parts, contact the place of purchase.
If you find any wrinkles in the covering, use a heat gun or covering iron to remove them. Use
caution while working around areas where the covering material overlap to prevent separating the
covers.
