Insert stem with brew through lid
into server and twist to tighten.
Always pre-heat server(s) with hot water for at least 10 minutes before using.
Rinse inside of server between each batch. Or at the end of the day run a batch
into server without coffee and close lid and server is ready to go the next morning.
Screw lid to the left to remove brew
through lid from brew through spout.
After brew is complete put on lid and twist
to the right to tighten to transport and or
retain heat.
BUNN® 1.5 GALLON
THERMAL SERVER
1
EQUIPMENT INFORMA
TION
On this card you will find directions for operating, cleaning and repairing minor problems you may have with
your Thermal Server. By regularly cleaning your servers and using the trouble shooting guide you will ensure
consistent quality in the cup with little or no downtime.
INSTRUCTIONS
1
2
3
