Seat Toledo 2019, Owner'S Manual, Page: 178 / 300

Infotainment System
The USB port

supplies the usual USB volt-
age of 5 volts for a USB connection.
External hard disks with a capacity greater
than 32 GB must be reformatted for the FAT32
file system in some circumstances. You will
find the necessary software and information
on the Internet.
Take into account all other instructions and
limitations regarding requirements for media
sources.
Disconnecting
Any connected data storage devices must
be prepared before their disconnection in or-
der to remove them.
●
From the main Media menu, press the
SETTINGS
button to open the
Media Set-
tings
menu or press the infotainment button

and then press
Settings
to open menu
System settings
.
●
Press the
Remove safely
function button. A
dropdown menu appears with the following
options: SD1 Card, SD2 Card* and USB. After
correctly ejecting the data storage device
from the system, the function button be-
comes inactive (grey colour).
●
Now the data storage device can be dis-
connected.
Note
●
Do not connect an external media player
at the same time to play music via Blue-
tooth
® and via the USB port

with the In-
fotainment system, as this could cause
playback limitations.
●
If the external player is an Apple™ device,
it cannot be simultaneously connected by
USB and by Bluetooth
®
.
●
If a connected device is not recognised,
disconnect all the connected devices and
try connecting the device again.
●
Do not use memory card adaptors, USB
extension cords or USB hubs!
External audio source connected to
the AUX-IN multimedia socket

Depending on the equipment and country
there may be an AUX-IN multimedia socket
›››
page 195 .
The connected external audio source is
played over the vehicle speakers and
cannot
be controlled via the Infotainment system
controls.
The connection of an external audio source is
indicated by
AUX
on the screen.
Connecting an external audio source to
the AUX-IN multimedia socket
●
Lower the base volume on the Infotainment
system.
● Connect the external audio source to the
AUX-IN multimedia socket.
●
Start playback on the external audio
source.
●
In the MEDIA main menu, press the
SOURCE
function button and select
AUX
.
Connecting an external audio
source via Bluetooth
®
Bluetooth ® Audio mode allows you to listen to
audio files being played on a Bluetooth
®
au-
dio source (e.g., a mobile telephone) connec-
ted via Bluetooth
® (audio playback by Blue-
tooth
®
) over the vehicle speakers.
Conditions
●
The Bluetooth ® audio source must support
the A2DP Bluetooth
®
profile.
●
In the
Bluetooth Settings menu
the

Bluetooth Audio (A2DP/AVRCP) function
must
be on. Select
Phone > Settings > Blue-
tooth
.
176