Seat Tarraco 2020, Owner'S Manual

Page: 209 / 424

Operating modes
Inserting or ejecting a memory
card
Depending on the features and the country,
the vehicle may have one or two slots for SD
cards.
Inserting a memory card
Insert the compatible memory card, with the
cut corner first and the contacts facing down,
into slot
›››
Fig. 196
2
, until it clicks into
place.
Removing a memory card
The inserted memory cards must be pre-
pared for removal.
●
From the main Media menu, press the
SETTINGS
button to open the
Media Set-
tings
menu or press the infotainment button

and then press
Settings
, to open the
System settings
menu.
●
Press the
Remove safely
function button. A
dropdown menu appears with the following
options: SD1 Card, SD2 Card*, USB1 and
USB2*. Pressing the corresponding function
button disables it.
●
Press the inserted memory card. The mem-
ory card “jumps” to the eject position.
●
Remove the memory card.
External data storage device con-
nected to the USB port

Depending on the features and the country,
the vehicle may have one or two USB con-
nections
›››
page 244 .
Where this manual refers to external data
storage devices, this means USB mass stor-
age devices containing supported audio files,
such as MP3 players, iPods™ and USB sticks.
Only supported audio files are displayed and
played. Other files are ignored.
Further operation of the external data medi-
um (changing track, selecting tracks and
playback modes) is described in the appro-
priate chapters of this manual
›››
page 198 .
Instructions and restrictions
Compatibility with Apple™ devices and other
media players depends on the unit.
The USB port

supplies the usual USB volt-
age of 5 volts for a USB connection.
External hard disks larger than 32 GB must be
reformatted for the FAT32 file system in some
circumstances. You will find the necessary
software and information on the Internet.
Take into account all other instructions and
limitations regarding requirements for media
sources.
iPod™, iPad™ and iPhone™
Depending on the country and equipment,
iPods™, iPads™ or iPhones™ can be connec-
ted via the device's own USB cable to the ve-
hicle’s USB port

and used as audio sour-
ces.
After connecting an iPod™, iPad™ or iPhone™,
the list views specific to the iPod™ are dis-
played at the top selection level (

Play-
lists
,

Artists
,

Albums
,

Tracks
,

Podcasts
, etc.).
Possible error messages after connecting
external data media
Error message
Cause and actions to
take
Source is not
supported.
It is not possible to play the
external data media or es-
tablish communication with
the adapter cable that is
used.
Check that the external data
media is connected and op-
erates correctly.
If possible, update the exter-
nal data media software.
Device not re-
sponding.
Communication interrupted.
Check that the external data
media is connected and op-
erates correctly.
»
207