manualshive.com logo in svg

Seat Tarraco 2020, Owner'S Manual

Share
Download
Seat Tarraco 2020 Owner'S Manual Download Page 161

Air conditioning

●

If the cooling system is switched off and

air recirculation mode switched on, the
windows can mist over very quickly, con-
siderably limiting visibility.

●

Switch air recirculation mode off when it

is not required.

CAUTION

Do not smoke when air recirculation is
switched on in vehicles with an air condi-
tioner. The smoke taken in could lie on the
cooling system vaporiser and on the acti-
vated charcoal cartridge of the dust and
pollen filter, leading to a permanently un-
pleasant smell.

Note

Climatronic: air recirculation mode is acti-
vated to prevent exhaust gas or unpleasant
odours from entering the vehicle interior
when it is in reverse and while the automat-
ic windscreen wiper is working.

Seat heating*

Fig. 157 

In the centre console: front seat heat-

ing switches.

Fig. 158 

In the rear part of the centre console:

rear seats heating switch.

With the engine on, the seat cushion and the
seat backrest can be heated electrically.

Control seat heating

●

Press buttons  

 or  

 on the control panel

to turn on the seat heating as high as possi-
ble.

●

Press buttons 

 or  

 repeatedly to adjust it

to the required level.

●

To turn off the seat heating, press button  

or  

 repeatedly until no LEDs are lit.

If the ignition is switched on again in approx.
the next 10 minutes, the driver seat heating is
automatically turned on to the level set the
last time.

Cases in which the heat seating should
not be switched on

Do not switch the seat heating on if any of the
following conditions are met:

●

The seat is not occupied.

●

The seat has a cover.

●

A child seat has been installed on the seat.

●

The seat cushion is wet or damp.

●

The outdoor or indoor temperature is great-

er than +25°C (77°F).

WARNING

People who cannot perceive pain or tem-
perature because of medications, paralysis
or chronic diseases (e.g. diabetes) or have
a limited perception of these, may suffer
burns to the back, buttocks or legs when
using seat heating.

●

People with limited pain and temperature

thresholds must never use seat heating.

●

If an abnormality in the device's temper-

ature control is detected, have it checked
by a specialist workshop.

»

159

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands