manualshive.com logo in svg

Seat Tarraco 2020, Owner'S Manual

Share
Download
Seat Tarraco 2020 Owner'S Manual Download Page 156

Operation

Climatronic* controls

Fig. 153 

In the centre console: Climatronic con-

trols.

Automatic mode 



Automatic adjustment of temperature, fan,
and air distribution. Automatic mode is disa-
bled when the ventilation is modified manual-
ly.

Cooling mode 



Press the button to switch on or off the cool-
ing system.

Temperature 

1

/

2

The temperature of the right and left sides
can be adjusted separately using the adjust-
ers. The selected temperature is shown on
the display of the climate control panel.

Synchronisation

: press button 



 so that

settings on the driver's side apply to the pas-
senger side. Use the temperature regulator

for the passenger side to set a different tem-
perature.

Blower 

The power of the fan is automatically adjus-
ted.

The fan is also adjusted manually by turning
the control.

Air distribution 

 / 

 / 

The airflow adjusts automatically for comfort.
It can also be manually distributed to the de-
sired zone by pressing the corresponding
button:

The airflow is directed towards the chest
The airflow is directed towards the foot-
well.
The airflow is directed at the windscreen.

Maximum cooling power 

The recirculation of air and the cooling sys-
tem turn on automatically and air distribution
adjusts automatically to the position 

.

Defrost/demist function 

The air drawn in from outside the vehicle is di-
rected at the windscreen and air recirculation
is automatically switched off. To defrost the
windscreen more quickly, the air is dehumidi-
fied at temperatures over approximately
+3°C (+38°F) and the fan runs at maximum
output.

Residual heat 



When the engine is still warm but the ignition
switched off, the residual heat of the engine
can be used to keep the vehicle interior

154

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands