manualshive.com logo in svg

Seat Tarraco 2020, Owner'S Manual

Share
Download
Seat Tarraco 2020 Owner'S Manual Download Page 154

Operation

●

Before switching the ignition on or off, un-

plug the appliances from the USB ports to
protect them from any damage caused by
fluctuations in voltage.

●

Some appliances may not work properly

when connected to the 230 volt sockets
due to a lack of power (watts).

Air conditioning

Heating, ventilation and
cooling

Related video

Fig. 152 

Air conditioning

Introduction

Depending on the vehicle’s equipment, sever-
al systems may have been fitted:

●

The 

manual air conditioning

 and the 

Cli-

matronic

 cool and dehumidify the air. They

operate most effectively with the windows
and the sunroof closed.

To switch a specific function on, press the ap-
propriate button. Press the button again to
switch off the function.

The LED on each control lights up to indicate
that the respective function of a control has
been switched on.

Dust and pollen filter

The dust and pollen filter with its activated
charcoal cartridge serves as a barrier
against impurities in the air taken into the ve-
hicle interior.

The dust and pollen filter must be changed
regularly so that air conditioner performance
is not adversely affected.

If the filter loses efficiency prematurely due to
use in areas with very high levels of air pollu-
tion, the filter must be changed more fre-
quently than stated in the Service Schedule.

WARNING

Reduced visibility through the windows in-
creases the risk of serious accidents.

●

Always ensure that all windows are free

of ice and snow, and that they are not fog-
ged, so as to maintain good visibility of ev-
erything outside.

●

Only drive when you have good visibility.

●

Always ensure that you use the air condi-

tioning, heater or rear window heating to
maintain good visibility to the outside.

●

Never leave the air recirculation on for a

long period of time. If the cooling system is
switched off and air recirculation mode
switched on, the windows can mist over
very quickly, considerably limiting visibility.

●

Switch air recirculation mode off when it

is not required.

152

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands