Home
/
Seat
/
SOUND SYSTEM 1.0
/
Manual

Seat SOUND SYSTEM 1.0, Manual, Page: 36 / 124

Share

Page: 36 / 124

Seat SOUND SYSTEM 1.0 Manual Download Page 36

RADIO

35

RADIO, CD/MP3

TEL (telephone)

Main radio menu

Introduction

The radio station list for the selected frequency band is
displayed in the main radio menu.

The station lists for the FM, MW and LW range differ in their behaviour. The FM
station list is updated automatically (dynamic), whereas the MW and LW
station lists must be updated manually (static).

The title line of the display shows whether the radio station is operating in FM
(frequency modulation), MW (medium wave) or LW (long wave). The
frequency band can be selected using the

Band

control button

If you do not use the navigation system for a while, the display of the station
list or memory list will be minimised. The minimised display only shows the
radio station you are currently listening to. Turn the rotary pushbutton to
display the complete station list or memory list again.

Note

You can select radio stations

page 36 on the instrument panel display

using the multi-function steering wheel*.

FM station list

The FM station list is dynamic (updated automatically).

Fig. 35 Radio: FM station list

– Press the

function button

– Using the rotary pushbutton, select the desired radio station

from the FM radio station list.

If the radio is not already set to the FM station list, you can switch over to the
waveband as described on

All the FM stations that can be received are on this list. The FM station list is
limited to a maximum of one hundred stations.

Note

If you do not use the navigation system for a while, the display of the station
list or memory list will be minimised. The minimised display only shows the
radio station you are currently listening to. Turn the rotary pushbutton to
display the complete station list or memory list again.

RADIO

Media System 1.0_EN.book Seite 35 Donnerstag, 10. September 2009 1:52 13

«
...
34
35
36
37
38
...
»

Summary of Contents for SOUND SYSTEM 1.0





























































































































Reviews:

No comments