Telephone management (PHONE)
mobile phone. If they coincide, you must
confirm it on
both
devices.
Once the link is complete, the main menu
PHONE will be shown.
Linking and connecting mobile telephones
You can link up to
20
mobile telephones to
the infotainment system, but
only one
mobile
phone can be connected as hands-free, and
only one
device as BT audio at any time.
When you turn on the infotainment system
the connection is automatically established
with the mobile phone that was last connec-
ted. If it cannot establish a connection with
that mobile phone, the telephone manager
will automatically try to establish a connec-
tion with the next mobile phone that appears
on the list of linked devices.
The working radius of the Bluetooth connec-
tion is
a maximum of 10 metres
. If this work-
ing radius is exceeded, the connection estab-
lished through Bluetooth will be interrupted.
The connection is
automatically
re-establish-
ed as soon as this device comes back into
the Bluetooth working radius.
If the maximum number of linked devices is
reached and you wish to link another one to
the system, it will automatically replace the
one that has recently been used the least. If
you wish to replace it with another one, the
user must erase it beforehand. To do so:
●
Press the unit button
Setup
within the tele-
phone context.
●
Press the function button
Bluetooth setup
.
●
Press the function button
My devices
.
●
In the list of devices linked, press the func-
tion button
remove
after the mobile phone to
be deleted and then press
Delete
to confirm
the process.
Note
●
The behaviour may vary depending on the
device connected.
●
For some android mobile devices you must
accept the request to access the PBAP phone-
book after linking, to be able to access the
phonebook. It is recommended to activate
the option “always” so as not to have to ac-
cept it every time you connect.
General information
Please refer to the notes on using a mobile
phone in the vehicle without connection to
exterior antenna
›››
Booklet Instruction Man-
ual, chapter Accessories and technical modi-
fications
.
Only use devices that support Bluetooth. At
your SEAT dealership, or on the Internet, you
will find information about products that sup-
port Bluetooth.
Take into account the instruction manual of
the mobile phone and of the manufacturer of
the accessories. In areas with poor coverage
there may be anomalies in the reception and
calls may be interrupted.
Most electronic devices are shielded against
radio frequency signals (high-frequency). On
some occasions, nevertheless, electronic de-
vices cannot be protected against the radio
frequency signals from the telephone manag-
er. This may produce interference.
Note
●
There may be restrictions on the use of
Bluetooth devices in some countries. Infor-
mation is available from the local authorities.
●
To connect the telephone manager to a de-
vice via Bluetooth technology, read the corre-
sponding instruction manual for the particu-
lar safety instructions. Only use products
that support Bluetooth.
Bluetooth
®
Bluetooth
®
Bluetooth technology is used to connect a
mobile phone to the vehicle's telephone
manager. To use the telephone manager with
a mobile phone with Bluetooth, the linking
process must be carried out once.
»
43