Telephone management (PHONE)
Note
In areas with special requirements and where
the use of mobile phones is prohibited, you
must keep the mobile phone and its prein-
stallation switched off at all times. The radia-
tion emitted by mobile phones when switch-
ed on can cause interference in sensitive
technical and medical equipment, which
could damage this equipment or cause it to
stop working properly.
Linking and connecting your mobile
phone to the infotainment system
To operate a mobile phone through the info-
tainment system, you need to link both devi-
ces
one time only
.
For your safety, we recommend you make the
link when the vehicle is stationary. In some
countries you
cannot
make the link with the
vehicle running.
You must guarantee the following setup in
the mobile phone and the infotainment sys-
tem:
●
The
Bluetooth
®
function must be active
and visible on the mobile phone and info-
tainment system, respectively.
●
The
keypad lock
of the mobile phone must
be disconnected.
●
The
notification and key tones
of your mo-
bile phone must be disconnected.
In some countries, after switching the igni-
tion on, the
Bluetooth
®
function of the
info-
tainment system should be activated or re-
main visible for around 3 minutes.
During the linking process you must enter da-
ta using your mobile phone's keypad. To do
so, you must have your mobile phone to
hand.
Once the link has been made, the schedule
and call lists stored in your mobile phone will
be loaded. The duration of the loading proc-
ess depends on the amount of data stored on
your mobile phone. When the loading proc-
ess is complete, the data will be available to
the infotainment system.
Starting the link from the system
●
Make sure the mobile device is active and
visible.
●
Press the
PHONE
unit button.
●
Press the
Find phone
function button.
ALTERNATIVELY:
●
Press the
PHONE
unit button.
●
Press the
Setup
function button.
●
Press the function button
Select phone
and
then
Find phone
.
ALTERNATIVELY:
●
Press the
PHONE
unit button.
●
Press the
Setup
function button.
●
Press the
Bluetooth setup
function button.
●
Press the
Find devices
function button.
ALTERNATIVELY:
●
Make the connection from the mobile de-
vice itself (ensure that the visibility of the in-
fotainment system in the menu
Phone setup >
BT setup
is active).
The search process can take up to 1 minute.
On the screen the system will dynamically
update the names of the bluetooth devices
found.
●
Select the infotainment system or the mo-
bile phone to which you want to connect from
the list of Bluetooth devices found.
The infotainment system and the mobile
phone will now be connected to each other.
In certain circumstances, it is possible that to
finish the connection between the two devi-
ces, you must enter additional data in the
mobile phone and infotainment system.
●
If necessary, confirm the link to the mobile
phone.
●
Use your mobile phone to enter and con-
firm your PIN code, as indicated in the dis-
play of the infotainment system.
●
ALTERNATIVELY:
Compare the PIN code
shown in the display of the infotainment sys-
tem with the PIN code that appears on the
42