Seat Media System Plus, Owner'S Manual, Page: 17 / 64

Audio mode
Hiding the
frequency
band Briefly press the function button
Manual
.
If you select a station with a stored sta-
tion button, the manual selection of the
frequency is also finalised. If you do not
do anything else, after a certain time the
frequency band will close automatically.
Storing stations
Storing the
station that
you are lis-
tening to in
one of the
stored sta-
tion but-
tons Hold down the desired stored station
button
›››
Fig. 12 until you hear the sig-
nal. The station that you are listening to
will be stored in this button.
Storing a
station
from the list
of stations
in one of
the stored
station but-
tons Press the function button Stations
›››
Fig. 12 to open the list of stations.
The stations already assigned to stored
station buttons are shown in the list of
stations marked with the symbol

›››
Fig. 13
.
Select the desired station holding it
down on the display until the screen for
storing stations appears.
Press the stored station button where
you wish to save the station. A signal will
sound and the station will then be saved
in this stored station button. The system
automatically returns to the list.
Deleting a
stored sta-
tion In the menu
Delete presets
, available in
the menu Radio setup you can delete the
stored stations one by one or all at once
›››
page 17 .
Scan function (SCAN)
When the scan function is running, all availa-
ble stations on the current frequency band
are played in sequence for around 5 seconds
each.
Starting the
scan function Briefly press the setup button.
OR: Press the function button
Setup
and then select
SCAN
.
Stopping the
scan function Press the function button SCAN
“crossed out” to stop the scan function
on the station you are listening to.
OR: Briefly press the setup button.
The scan function also ends when you
manually select a station using the
stored station buttons, or when a traffic
report comes in.
Autostore (automatic station storing)
Hold the RADIO button down for approxi-
mately 10 seconds to carry out the autostore
function for the stations that can be tuned in
at the time of running the Autostore. The sta-
tions are saved in the stored station buttons.
Note
This function can take several minutes, dur-
ing which time the radio will remain muted. In
addition, any stored stations assigned previ-
ously will be deleted.
Station list (only in FM mode)
Fig. 14 Standard representation: FM station
list menu
Stations that are available at a certain time
are displayed on the station list screen (
STA-
TIONS
function button). This list may be ar-
ranged by station group or alphabetically.
15