Seat Media System E Manual Download Page 6

Page: 6 / 167

Overview

Operating

RADIO, MEDIA (audiovisual

– Press and hold the ON/OFF button to switch the navigation

system off.

The navigation system can also be turned on and off manually if necessary. If
the navigation system was

switched on

in this way with the ignition key

removed, it will remain available for about thirty minutes.

If the system was

switched off

manually, it will

not

be switched on again auto-

matically the next time the ignition is turned on.

Note

To avoid discharging the battery, the navigation system should not be left
switched on for unnecessary long periods with the engine off.

Opening and closing the display

The display must be opened to access the drives located
behind it.

Fig. 3 Navigation system:
Button for opening and
closing the display

Fig. 4 Display open:
Access to the DVD drive
and memory card readers

media_systemE_EN.book Seite 5 Montag, 21. September 2009 1:48 13

Summary of Contents for Media System E








































































































































































Search results

Summary of Contents for Media System E

Reviews:

Related manuals for Media System E

Brands by name

Popular brands

Seat Media System E, Manual

Search results

Summary of Contents for Media System E

Reviews:

Related manuals for Media System E

Brands by name

Popular brands