Seat Media System Colour, Owner'S Manual

Page: 18 / 58

Radio
Select, tune and store stations to
memory
Selecting a station
Select sta-
tions with the
arrow buttons
Press function button

or

. This
will change between stored or avail-
able stations, depending on the set-
up of the arrow buttons. Arrow but-
tons setup in the
Setup (FM, AM
and DAB) menu
›››
page 18 .
Selecting a
station from a
station list
Press the
Stations
function button to
open the station list. Go through the
list and select the desired station by
pressing it. Press the
BACK

func-
tion button to return to the previous
screen.
To update the
list of stations
The list of stations in the FM fre-
quency band is automatically up-
dated. For the AM and DAB frequen-
cy bands, press the function button
Update
to update the station list.
Manually tuning in a station frequency.
Viewing the
frequency di-
al
Briefly press the
Manual
function
button.
Adjusting the
frequency in
stages
Press the buttons
+
or
–
, to the
right and left of the frequency band.
OR: Turn the adjustment knob.
Quickly
browsing the
frequency
band
Place your finger on the slider in the
frequency dial and drag it along the
dial.
Manually tuning in a station frequency.
Hiding the
frequency
band
Briefly press the button
Manual
.
Storing stations
Storing the
station that is
currently be-
ing listened to.
Press and hold the desired memo-
ry button
›››
Fig. 8 until an audible
signal is heard.
The station tuned in will be stored
on this memory button.
Storing a sta-
tion on the list
of stations
Press the
STATION LIST
›››
Fig. 8
function button to open the station
list.
The stations that are already stor-
ed on a memory button are
marked on the station list with the
symbol

›››
Fig. 9 .
Select the desired station by
pressing and holding it on the
screen. A screen will appear to
store the station on the memory
buttons.
Press the memory button where
the station is to be stored.
An audible signal is heard and the
station is stored on the memory
button. To continue storing other
stations from the list, repeat the
process.
Storing stations
Deleting stor-
ed stations
All the stored stations can be de-
leted together or separately from
the
FM, AM, DAB Setup
menu.
Scan function (SCAN)
When the scan function is running, all availa-
ble stations on the current frequency band
are played in sequence for about 5 seconds
each.
Starting and stopping the scan function
Starting the
scan function
Press the
SETTINGS
function button
and then select
SCAN
.
Stopping the
scan function
Press the

function button to
stop the scan function at the sta-
tion that is currently playing.
OR: Briefly press the adjustment
knob.
Manually selecting a station with
the memory buttons or changing
the screen also stops the scan
function.
Traffic information (TP)
Traffic information tracking with the TP func-
tion is only possible if the station is available.
The stations with the traffic information func-
tion are indicated in the Radio main menu
»
17