Seat Ateca 2018 Owner'S Manual Download

Page: 127 / 412

Instruments and warning/control lamps

CAUTION

Failure to heed the control lamps and text
messages when they appear may result in
faults in the vehicle.

Multifunction steering wheel*

Operating the audio, telephone and navigation system with voice control

Fig. 135

Controls on the steering wheel.

The steering wheel includes a multifunction
module from where it is possible to control

the audio, telephone and radio/navigation
functions without needing to distract the driv-
er.

Applies to vehicles with analogue instrument panel

Button

Radio

Media (except AUX)

AUX

Telephone*

Navigation*

Turn

Turn volume up/down. You
do not need to be in audio
mode (radio).

Turn volume up/down. You
do not need to be in audio

mode (media).

Turn volume up/down. You
do not need to be in audio

mode (media).

Turn volume up/down. You
do not need to be in tele-

phone mode.

Turn announcement volume
up/down. You do not need to be in

navigation mode but there has to
be an announcement active when
you adjust the volume.

125

Summary of Contents for Ateca 2018





























































































































































































































































































































































































































Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands

Seat Ateca 2018, Owner'S Manual

Search results

Summary of Contents for Ateca 2018

Reviews:

Related manuals for Ateca 2018

Brands by name

Popular brands