Seat Arona 2018, Owner'S Manual

Page: 56 / 372

The essentials
Removing
●
Attach the wire hook (vehicle tools
›››
Fig. 69
6
) to one of the chambers of the
central wheel trim.
● Insert the box spanner through the hook,
supporting it on the tyre and remove the
wheel trim.
Fitting
●
Fit the central wheel trim onto the rim. The
bottom of the “S” of the SEAT badge should
align with the inflation valve
›››
Fig. 70
1
.
●
Press the central trim firmly until it locks in
with an audible click.
Note
There is also a valve mark on the back of
the central wheel trim that indicates the
correct alignment.
Wheel bolt caps*
Fig. 71
Wheel: wheel bolts with caps.
Removal
●
Fit the plastic clip (vehicle tools) over the
cap until it clicks into place
›››
Fig. 71 .
●
Remove the cap with the plastic clip.
Wheel bolts
Fig. 72
Tyre change: slacken the wheel bolts.
Fig. 73
Tyre change: tyre valve
1
and the cor-
rect position for the anti-theft wheel locking
bolt
2
or
3
.
Use only the wheel wrench belonging to the
car to loosen the wheel bolts.
Loosen the wheel bolts only about one turn
before raising the vehicle with the jack.
54