Seat Arona 2018, Owner'S Manual

Page: 199 / 372

Operating modes
Connecting an external audio
source through WLAN*
3
Not available for model: Media System
Touch/Colour
WLAN allows wireless connection between an
external audio source (for example a smart
phone) and the Infotainment system.
To use this connection, the device being con-
nected must have an app compatible with
the UPnP (Universal Plug and Play) communi-
cation protocol, allowing the app to provide
the system with the available media content.
Conditions
●
Having a compatible (UPnP) app installed
on the mobile device.
●
Having the
Enable WLAN connection
op-
tion active, which can be found in the wireless
connection configuration.
●
Pairing the mobile device to the Infotain-
ment system using a password generated by
the system. The pairing must be done from
the mobile device that you wish to connect to
the Infotainment system.
Starting the WLAN audio transfer
●
Lower the base volume on the Infotainment
system.
●
Start the UPnP app or the app for the play-
back of the WLAN audio source.
● In the MEDIA main menu, press the
SOURCE
function button and select
WLAN
.
●
Please refer to the instructions on the
screen of the Infotainment system and on the
WLAN audio source regarding the rest of the
procedure.
Controlling playback
The extent to which the WLAN audio source
can be controlled via the Infotainment system
depends on the connected WLAN audio
source and the application used.
Note
●
The Infotainment system does not pro-
vide an internet connection, it only estab-
lishes a wireless connection between the
mobile device and said system.
●
Via the WLAN, only the connection be-
tween the device and the Infotainment sys-
tem can be guaranteed, its operation de-
pends on the application itself.
Images
3
Valid for the model: Media System Plus/Navi
System
Using the Images menu, image files can be
viewed (e.g. photos) individually or as a slide-
show.
The image files must be stored on a compati-
ble data storage device (e.g., a
CD or an SD
card ).
●
Press the Infotainment button

›››
Fig. 173
12
and then press the
Images
function button.
●
Press the
SOURCE
function button to select
the source where the pictures in question are
located.
Function button: function
SOURCE Viewing and selecting the source.
SELECTION
Opens a list of image files.

The image viewed was obtained via
GPS localisation and upon pressing
this function button, the navigator
menu opens to start a route to this
destination.

/

Rotate the view of the image to the
left or the right.

Reset the view of the image.

To stop the playback of a slideshow.
The

function button changes to

.

To continue the playback of a slide-
show. The

function button
changes to

.
»
197