background image

Seat Comfort Systems - Warranty Information

36 MONTH/36,000 MILE LIMITED WARRANTY
Seat Comfort Systems warrants to the original retail purchaser of this product 
that should this product or any part thereof, under normal use and conditions, be 
proven to have defective material or workmanship within 36 months or 36,000 
miles of the original purchase, such defect(s) will be repaired or replaced without 
charge for the parts. This warranty does not apply to batteries or normal wear 
and tear associated with the Product.

To obtain repair or replacement with the terms of this Warranty, the product is to 
be returned with warranty card, dated bill of sale, description of defect to the 
installing dealer and/or retailer.

This Warranty does not cover costs incurred for the removal or reinstallation of 
the product, and/or related components, and/or damage to the vehicle's electrical 
system or components.

This Warranty does not apply to any product or part thereof which in the opinion 
of the Company has been damaged through alteration, improper installation, 
misuse, neglect, accident, or customer abuse.

No person or representative is authorized to assume for the Company any 
liability other than expressed herein in connection with the sale of this product.

THE EXTENT OF THE COMPANYS LIABILITY UNDER THIS WARRANTY IS 
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN
NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE 
PRICE PAID BY THE PURCHASER FOR THE PRODUCT.

WARNING: The installation instructions have been carefully compiled through 
actual vehicle installations and to the best of our ability is accurate. However, we 
do not warrant the accuracy of this information against changes in vehicle design, 
the use or misuse of this information or typographical errors.

It is the responsibility of the installer to verify the proper wire attachments prior to 
and after the installation to assure proper operation. We do not accept any 
responsibility for damage to the vehicle or injury to its occupants caused by the 
use of this information. Improper installation and/or connection to the incorrect 
wires could cause the massage system or vehicle malfunction, component 
damage and/or personal injury for you and/or your passengers.

Seat Comfort Systems Inc.

(949) 470 0696

P8

Summary of Contents for SCS6MC









Reviews: