P5
Wire Placement
Route the motor wires through the foam and connect to the
distribution box (below). Make sure that there are no loose
wires that may interfere with the lumbar or recliner mechanisms.
Attach the power connector wire to P/W (below) and route the wire
with fuse to 12 volt power.
20 - Zone 6 - Upper Back: Left
21 - Zone 6 - Upper Back: Right
30 - Zone 7 - Middle Back: Left
31 - Zone 7 - Middle Back: Right
40 - Zone 8 - Lower Back: Right
41 - Zone 8 - Lower Back: Left
P/W - Power
Connector/Zone Locations
