WARNINGS
• Do not exceed the posted speed limit.
• Do not use if the indicator band is exposed on any of
your SeaSucker’s pumps.
• Do not use if all of your rack’s vacuum cups cannot
maintain a full vacuum seal for at least 6 hours at a
time.
• Check the indicator band during use.
• Clean the mounting surface before attaching.
• Clean vacuum pads before attaching.
• Clean and lubricate your SeaSuckers’ pumps regularly.
• Remove racks when not in use.
• Attach protective covers on vacuum pads when not in
use.
• Inspect screws regularly and retighten if necessary.
• Do not exceed the maximum load limit of 35 kg/77 lbs.
• Detach your Pallavicini Ski Rack before using a car
wash.
The Rack’s Responsibility
With all SeaSucker vacuum mounts fully engaged, the rack will securely hold skis or
snowboards at speeds up to 70 mph. The rack will indicate if the SeaSuckers are not
maintaining vacuum: the indicator band on the pump of each SeaSucker will extend out
and become visible upon loss of vacuum. If you see the indicator band, you must re-
pump the SeaSucker before the rack can be safely used again.
Your Responsibility
You must inspect the indicator bands on all SeaSucker vacuum mounts when entering
and exiting your vehicle. A quick glance will tell you if the rack is at full power. If the
indicator band is visible, you must re-pump the SeaSucker before the rack can be used.
If any of your SeaSuckers do not hold vacuum for at least 4 hours, they may need to be
cleaned, repaired, or replaced. Your rack comes with an extra SeaSucker vacuum pump;
keep it with your rack in case you accidentally damage one of your vacuum mounts’
pumps.
Manufactured by:
SeaSucker, LLC
Bradenton, Florida
What’s in the Box:
Your Pallavicini Ski Rack comes with
the following components and
accessories:
• (2) Pallavicini Rack decks
•
(4) 6” SeaSucker vacuum mounts
with mounting bracket attached
•
(4) Retaining cords with pads
•
(2) Ball bungees
•
(1) 5/32 Allen key for assembly
•
(1) 5g Lube Tube (for vacuum
pump maintenance)
•
(1) SeaSucker vacuum pump (for
replacement/spare)
READ THIS BEFORE USING
YOUR PALLAVICINI SKI RACK!
