1
Tools Required:
Allen key
1/2” Socket
Hammer
S
EASIDE
C
ASUAL
F
URNITURE
(43) Traditional Picnic Table
Rev. C
Hardware:
(27) 4” Carriage Bolts (5/16”)
(24) 3” Carriage Bolts (5/16”)
(51) Nuts
(51) Flat Washers
(51) Lock Washers
(4) 80mm Lags
(2) Table Slats with 3 holes (Aluminum Reinforced)
(2) Table Slats with 5 holes (Aluminum Reinforced)
(1) Center Table Slat with Umbrella hole (Aluminum
Reinforced)
(4) Legs
:
(2)Left and (2) Right
(1) Table Center Cleat with 2 holes
(2) Table End Cleats with 4 holes
A
SSEMBLY
I
NSTRUCTIONS
Step 1: Set Up
READ ENTIRE INSTRUCTIONS BEFORE BEGINNING!
Carefully remove contents
from box. Make sure that all parts and hardware are included.
Place All Table Slats face down with Aluminum facing up
on a flat clean surface. Use the following list for placement.
1st Slat (Far Left)= Table Slat with 3 holes #1,#6,#11
2nd Slat (Middle Left)= Table Slat with 5 holes #2,#7,#12
3rd Slat (Middle)= Center Table Slat with 3 holes #3,#8,#13
4th Slat (Middle Right)= Table Slat with 5 holes #4,#9,#14
5th Slat (Far Right)= Table Slat with 3 holes #5,#10,#15
(Right Picture)
Step 2: Table Slat Placement
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
Parts List
(4) Seat Slats with 2 holes (Aluminum
Reinforced)
(4) Seat Cleats
(2) Angle Braces
(2) Seat Supports
Box 1:
Box 2:
Instruction Revision: C
