7
ASSEMBLY
Install the female hitch between the two supports
Install the female hitch (item 1)
# Item
Description
Action
1
Female hitch
Install between the
two supports.
2
Hex bolt 3/8 x 1’’
(qty 4)
Insert as shown.
3
Flange nut 3/8’’
(qty 4)
Tighten all the nuts
firmly.
Install the supports (item 5) on each side of the
vehicle.
Item #
Description
Action
1
Carriage bolt,
3/8 x 1’’ (qty 6)
Insert as shown.
2
Carriage bolt,
5/16 x 1’’ (qty 2)
Insert as shown.
*
3
Flat washer 1/2’’,
(qty 6)
See*
4
Flat washer 7/16’’,
(qty 2)
Insert on
carriage bolt
(item 2)
5
Support
(qty 2)
Install on the
bolts as shown.
6
Flange nut 3/8’’,
(qty 6)
Do not tighten
now.
7
Flange nut 5/16’’,
(qty 2)
Do not tighten
now.
*
For tractors with a engine mounting plate use only
two washers. Do not use washer A.
*
For tractors without an engine mounting plate use
all three washers.
Install the supports
STEP 1
SUBFRAME INSTALLATION:
Refer to parts breakdown section for parts
identification.
