14
ASSEMBLY
For tractors with Electric Clutch:
Install the belt on the engine pulley of the vehicle.
Check the tension on the spring.
If necessary, adjust the tension by moving the
adjustment rod (item 1) and tighten the set screw
(item 2).
No modifications to be done
*For tractors with a 5 1/2’’ engine pulley:
A shorter drive belt may be necessary to achieve the
proper tension.
Belt A-51 (105190) instead of a A-52 (104847)
Install the drive mechanism
Install the drive mechanism (item 1).
# Item
Description
Action
1
The front end of drive
mechanism
Hook on the sleeves.
2
The back end of
drive mechanism
Install between the
supports.
3
Two pins
Insert as shown on
each side.
*See note.
4
Hair pins
Secure the pins.
*NOTE:
If the pins (item 3) are difficult to slide in the
support, loosen the nuts ( item A).
