13
ASSEMBLY
STEP
4:
DRIVE MECHANISM INSTALLATION:
WARNING
TO PREVENT INJURIES:
It is the person who installs the drive mechanism
responsibility to make sure that when the clutch
is disengaged that all moving parts stop.
For more information, do not hesitate to contact
the technical support.
WARNING
TO PREVENT INJURIES:
Stop the motor.
Apply parking brake.
Remove the ignition key.
Disconnect the wire from the spark plug(s) and
keep away from spark plug(s) to prevent accidental
starting.
NOTE: You must remove mower deck to install
the drive mechanism.
Install the support (item 2) on each side.
# Item
Description
Action
1
Carriage bolt
3/8 x 3/4’’ (qty 4)
Insert as shown.
2
Support (qty 2)
See*
3
Flange nut 3/8’’
(qty 4)
Tighten firmly.
*Choose the appropriate holes in the supports and
make sure that there is no interference between the
pin and the parts of the vehicle.
Install the supports
The next two instructions are for vehicles
that do not have pins that are used as
supports for the mower deck.
Use the drilling template to drill a hole on each side of
the vehicle.
Drill a hole if applicable
Install the sleeves
Install the sleeve (item 1) on each side.
# Item
Description
Action
1
Sleeve (qty 2)
Install as shown.
2
Hex bolt 3/8 x 1
1/4’’ (qty 2)
Insert in the sleeve.
3
Flange nut 3/8’’
(qty 2)
Tighten firmly.
