9
ASSEMBLY
STEP 2
SUBFRAME PREPARATION:
Step B :
Install the winch on the female hitch using the bolts 5/16” x 1-1/4” GR8 as illus-
trated (1).
Install the hitch plate as illustrated (2).
Insert the nylon lock nuts 5/16” as illustrated (3), tighten firmly.
Step A:
Pass the cable (1) through the pulley assem-
bly (2) as illustrated.
Attach the chain link of the cable (1) to the
attaching plate (3) and secure it with the hair
pin (4) as illustrated.
Step B:
Close the pulley assembly (1) around the cable using the shackle (2).
Step A :
Remove the bolts and nuts holding the winch to the female hitch assembly.
(item 1)
Installation of the pulley :
Install the heat shield
Install the heat shield (item 1).
# Item
Description
Action
1
Heat shield
Install as shown.
2
Hex bolts 1/4 x 1/2’’
(qty 2)
Tighten firmly.
NOTE: If the tractor has a front muffler, install the
heat shield (item 3) using the two bolts (item 4)
which holds the winch on the frame.