8
NOTE: Use these same instructions for both
sides of tractor.
Manual Clutch:
Install the new belt guides (item A)
that are included with the drive mechanism on the
bottom carriage bolt (item 1). Choose hole A1 or A2
that best suits to guide the belt around the engine
pulley. Place a 1/2’’ flat washer (items B & C) over
the belt guide and the top carriage bolt. Continue with
the handle support installation.
Electric Clutch:
Do not install belt guides. Place a
1/2’’ flat washer (item B) over the bottom carriage
bolt. Continue with the handle support (left side)
installation and cab support (right side).
Install the handle support (item 2) on the left side and
the cab support on the right side as shown.
# Item
Description
Action
1
Carriage bolt
3/8 x 1’’ (qty 4)
Insert the bolts as
shown.
2
Handle / cab support
Install as shown.
**3
Thread cutting screw
3/8 x1’’
See **
4
Flat washer 3/8’’
(qty 4)
Install as shown.
5
Flange nut 3/8’’
(qty 4)
Tighten the nuts.
6
Square head set
screw 5/16 x 1/2’’
Insert in the hole of
the handle.
7
Plastic grommet
Insert as shown.
**
Use this screw if the bottom hole is threaded.
ASSEMBLY
Install the handle support on left side
Install the cab support on right side
Install the spring (item 1)
# Item
Description
Action
1
Spring
Install the spring
on the frame as
shown.
NOTE
: The latch must move freely.
Install the spring as shown
