background image

instructions for

wheel dolly set 680kg capacity

model no: 

ws681

thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions, 

and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  safety  

 

‰

 

  waRNiNg!

 ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this  

 

 equipment.

 

9

  

familiarise yourself with this product’s application and limitations, as well as the specific warnings below relating to their use.

 

9

 

  ensure the Wheel dollies are in sound condition and good working order. take action for immediate repair or replacement of damaged parts. 

 

Use genuine parts only. The use of improper parts may be dangerous and will invalidate the warranty.

 

9

   Wheel dollies should only be used in suitable, well lit areas.

 

9

  

Wheel Dollies must be used in pairs at either the front or rear of the vehicle.

 

 

9

  

they must never be used diagonally.

 

9

   Keep general area clean and tidy and free from obstructions.

 

9

   use Wheel dollies on level and solid ground, preferably concrete. 

 

 

  

 

9

   maintain the

 

Wheel dollies in good condition.

 

9

   ensure there are no passengers in the vehicle.

 

9

   ensure the Wheel dollies are free to move and that there are no obstructions in the area of use.

 

9

  

When not in use store Wheel dolies in a safe, dry, childproof area.

 

8

  

do Not start or drive the vehicle whilst it is raised on wheel dollies.

 

8

  

do Not

 use the Wheel dollies for purposes other than that for which they are intended.

 

8

  

do Not 

allow untrained persons to operate the Wheel dollies.

 

8

  

do Not

 leave the vehicle unattended whilst it is raised on the Wheel dollies. 

 

8

 

  do Not

 operate the Wheel dollies when you are tired or under the influence of alcohol, drugs or intoxicating medication.

 

8

  

do Not

 get the Wheel dollies wet or use in damp or wet locations or areas where there is condensation.

 

8

  

do Not

 exceed the rated capacity of the Wheel dollies. remember that the front of a vehicle is usually heavier than the rear.

 

8

  

do Not

 use the Wheel dollies to support a vehicle in order to do work underneath it.

 

9

  

maintain correct balance and footing when moving vehicle. ensure the floor is not slippery and wear non-slip shoes.

 

9

   ensure all non-essential persons keep a safe distance whilst the Wheel dollies are in use.

  

iMpoRtaNt - 

We recommend that at least 2 persons are involved in manoeuvring the vehicle when supported on wheel dollies. the  

   

vehicle’s weight provides a large amount of inertia which has to be overcome to get the vehicle moving and more importantly, stopped.

 

‰

  

waRNiNg!

 

The warnings, cautions and instructions covered in this manual cannot cover all possible conditions and situations that may  

  occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be  

 

  applied by the operator.

2.  iNtRoductioN  

Heavy-duty steel plate with rust resistant finish. fitted with four Ø75mm metal castors with two lockable castors. each dolly features a side handle 

for easy carrying. can handle up to 250mm profiles. suitable for bodyshops, workshops and car parks. 

3.  specificatioN

model no: ................................................................... Ws681

capacity each: ........................................................... 250mm

castor diameter: ....................................................... Ø75mm

Weight each: ................................................................. 7.6kg

4.  MaiNteNaNce

4.1.    

Before each use check for any visible damage. if any suspect item is found, remove dolly from service and take necessary action to 

 

remedy the problem.

 

8

  

do Not

 use the dolly if believed to have been subjected to an abnormal load or shock load.

4.2.    

Keep the dolly clean and periodically lubricate the wheels and castor bearings.

Ws681| issue 2(l) 25/07/17

Original Language Version

© Jack sealey limited

refer to

instruction 

manual

Wear safety

footwear

Reviews: