TIMING TOOL KIT - ALFA ROMEO, FIAT, GM,
SAAB - 1.4, 1.6, 1.8 TWINPORT - BELT DRIVE
MODEL NO:
VSE5006.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING!
Wear approved eye protection. Wear appropriate Personal Protective Equipment. A full range of Personal Protective
Equipment is available from your Sealey stockist.
WARNING!
Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to when
using tools.
8
DO NOT
use tools if damaged.
9
Maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.
9
Ensure that a vehicle that has been raised by a jack is adequately supported. Use axle stands.
8
DO NOT
attempt to start or move a vehicle whilst in gear and with timing devices fitted.
9
Wear suitable clothing to avoid snagging.
DO NOT
wear jewellery. Tie back long hair.
9
Account for all tools, parts and components being used.
DO NOT
leave these in or near the engine. Return tools to suitable storage
after
use.
9
When not in use, store in a safe, dry childproof place.
9
Keep children and unauthorised persons away from the work area.
IMPORTANT! These instructions are provided as a guide only. Always refer to the vehicle manufacturer’s service instructions
or a proprietary manual to establish the correct procedure and data.
WARNING!
The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations. The Operator /
user must apply caution and common sense (good practical sense).
9
When timing an engine, always prevent the engine from being turned over. Use a notice and / or inhibit the engine.
WARNING!
Incorrect or out of phase camshaft timing can result in contact between the valve head and the piston crown. This will cause
damage to the engine.
2. INTRODUCTION
Comprises camshaft setting tools and belt tensioner locking pins.
Suitable for timing applications on all 1.4, 1.6 and 1.8 Twinport
petrol engines with belt drive. Supplied in a storage case with
instructions and a warning tag.
3. CONTENTS
VSE5006.V2 Issue 1 20/04/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection
2
3
1
4
5
6
OEM Part Number
Item Part No.
Description
Vauxhall/Opel
Chevrolet/
Saab
Alfa Romeo/
Fiat
1
VSE5006-01
Auxiliary Belt Tensioner Locking Pin
KM-6349/KM-6130 EN-6349
-
2
VSE5006-02
Flywheel Holding Tool
KM911
-
-
3
VSE5006-03
Timing Belt Tensioner Locking Pin
KM-6333
EN-6333
-
4
VSE5006-04
Camshaft Sprocket Locking Tool
KM-6340
EN-6340
2.000.012.100
5
VSE5006-05
Camshaft Setting Plate
KM-6628-A
-
2.000.012.000
6
VSE5006-06
Flywheel Holding Tool
KM-6625
EN-6625
2.000.012.800
