![background image](http://html.mh-extra.com/html/sealey/vs9201-v2/vs9201-v2_instructions_1226139001.webp)
instructions for:
Universal cable ejection tool set
model no:
vs9201.v2
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
1. saFetY
8
Do not
use cable ejection tools on 240V circuits, the tools are intended for use on 12/24V automotive wiring systems only.
9
ensure that the vehicle ignition is turned off before releasing connectors.
WarninG!
use extreme caution when working near ignition coils, distributor caps, ignition wires and spark plugs. these components
create hazardous voltages when the engine is running.
9
remove personal metallic items such as rings, bracelets, necklaces and watches. A battery can
produce a short-circuit current which is high enough to weld such items to the vehicle and cause
severe burns.
9
ensure that hands and clothing are clear of fan blades, belts and other moving or hot parts of the
engine. remove ties and contain long hair.
9
Wear safety eye protection and protective clothing. if working near a battery avoid touching eyes.
9
Wash immediately with soap and water if battery acid contacts skin or clothing.
9
if acid enters eye, flush eye immediately with cool, clean running water for at least 15 minutes and
seek immediate medical attention.
8
Do not
smoke or allow a spark or flame when in the vicinity of a battery or engine.
9
ensure that the cable release tools are in good condition before use.
Do not
use if damaged.
9
Keep tools and other items away from the engine and ensure that you can see the battery and
working parts of engine clearly.
9
Keep children and unauthorised persons away from the work area.
8
Do not
use the cable ejection tools for a task for which they are not designed.
WarninG:
the warnings, cautions and instructions discussed in this manual cannot cover all possible conditions and situations that may
occur. it must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by
the operator.
2.
i
introDUction
reduce time spent on, and damage to, vehicle electrical systems with these connector tools. set consists of cable extraction, contact ejection
and contact dismantling tools. covers a wide range of connectors, including Kabelex. Vehicle coverage: BmW, daimler/chrysler, fiat, ford, mAn,
mazda, Porsche, PsA, renault, saab, seat, skoda, VAG, Vauxhall/opel. supplied in a blow moulded storage case.
Vs9201.V2 issue 1 15/01/18
Original Language Version
© Jack sealey limited
refer to
instruction
manual
Warning:
electricity
Wear
protective
clothing
Wear
eye
protection