Ø8MM CAMERA VIDEO BORESCOPES
MODEL NO:
VS8111, VS8112
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1.
GENERAL SAFETY
9
Always perform automotive testing in a safe environment.
9
Keep your work area clean and well lit.
9
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
9
Operate the tool in a well-ventilated work area.
8
DO NOT
operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
8
DO NOT
use the tool around corrosive chemicals which can damage the tool.
8
DO NOT
abuse the flexible cable. Never use the flexible cable to carry the tool.
8
DO NOT
drop the borescope, it is not shock proof.
9
Keep bystanders and children away while operating the tool.
9
Keep the tool dry, clean, free from oil, water and grease.
WARNING:
The handheld display unit is
NOT
waterproof.
9
Handle the borescope with care. If it is dropped, check for breakage and any other conditions which may affect its operation.
8
DO NOT
immerse the imager head and cable into corrosive substances, petroleum or oil.
8
DO NOT
use near moving machinery.
8
DO NOT
use excessive force to insert or withdraw the imager head or cable.
8
DO NOT
use the tool while tired or under the influence of drugs, alcohol, or intoxicating medication.
8
DO NOT
use the tool for personal or medical use in any way.
1.2.
CHARGING SAFETY
9
Use only the supplied charger.
9
Disconnect the charger from the electrical supply when not in use.
8
DO NOT
charge in an explosive atmosphere or in the presence of flammable material.
8
DO NOT
exceed the maximum charging time.
1.3.
The warnings, precautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
2. INTRODUCTION
H
igh performance handheld borescope with 60mm colour LCD screen and waterproof probe pod with IP67 rating. Features video record/
playback and still images. Videos and images are stored on a micro SD card (not supplied). 2600mAh Battery capacity allowing up to 10 hours
working time. Kit includes 45° mirror, hook and magnetic pick-up. USB Charging cable supplied.
3. SPECIFICATION
VS8111, VS8112 Issue 1 11/08/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Model:
VS8111
VS8112
Camera Probe Length:
2m
10m
C
amera:
Ø
8mm
Ø
8mm
M
irror Flip/Rotate Function
Yes
Yes
P
od Length:
50mm
50mm
Power Source:
2600 mAh Battery
2600 mAh Battery
R
ecord Function (Video + Still)
Yes
Yes
S
creen Resolution:
1920 x 1080
1920 x 1080
Screen Size
60mm
60mm
SD Memory Slot
Yes
Yes
V
iewing Angle:
178
0
178
0
Accessories
45
0
Mirror, Magnetic Pick-up and Hook
45
0
Mirror, Magnetic Pick-up and Hook
