WARNING!
Ensure all Health and Safety, local authority, and general workshop practice regulations are strictly adhered to when using
tools.
DO NOT
use tools if damaged or worn.
Maintain the tools in good and clean condition for best and safest performance.
Ensure all threads are clean and well lubricated.
Ensure vehicle is adequately supported with axle stands, ramps, etc. as appropriate.
Wear suitable clothing to avoid snagging.
DO NOT
wear jewellery. Tie back long hair.
Wear approved eye protection. A full range of personal safety equipment is available from your Sealey dealer.
Account for all tools and parts being used and
DO NOT
leave them in or on the vehicle.
IMPORTANT:
Always refer to the vehicle manufacturer’s service instructions, or proprietary manual, to establish the correct procedure and
data for the specific vehicle you are working on. These instructions for use are provided as a guide only.
INSTRUCTIONS FOR:
WHEEL BEARING
REMOVAL / INSTALLATION KIT
MODEL No:
VS7020.V3
Comprehensive kit of tools for the fast and effective removal and Installation of wheel bearings on front-wheel drive vehicles. Reduces chances of
damage to hub and bearing. Heavy-duty steel drifts with phosphate coating to prevent corrosion. Heavyweight drive screw for use with impact tools.
Also suitable for removing and installing large industrial bearings. Supplied in carry-case.
Model No:
VS7020.V3
Drift Sizes Ø:
55, 60, 64, 67, 73, 75, 78, 82, 84, 88mm
End Cap Ø:
50mm
Sleeve Ø External:
76, 86, 92, 101mm
Hub screw length:
210mm
Hub screw drive:
32, 38mm
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATIONS
Refer to
instruction
manual
Wear eye
protection
VS7020.V3 Issue: 2(I) - 16/12/15
Original Language Version
© Jack Sealey Limited
4. CONTENTS
