WARNING!
Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using
this equipment.
Read instructions thoroughly to ensure the safe and effective use.
Important! Read instructions in conjunction with
vehicle or equipment manufacturer's workshop manual.
Maintain the apparatus in good condition. Before each use check condition of each component. If any component is
damaged, replace immediately. Use genuine parts only. Unauthorised parts may not function correctly.
Use in a suitable work area. Keep area free from unrelated materials and ensure that there is adequate lighting.
Keep children and unauthorised persons away from the working area.
DO NOT
use the reamer, tap or insertion tool when you are tired or under the influence of alcohol, drugs or intoxicating
medication.
DO NOT
use the repair kit for any purpose other than that for which it is designed.
When not in use return parts to the case, and store it in a safe, dry, childproof location.
InStRUctIonS foR:
M18x1.5 OXYGEN
SENSOR THREAD REPAIR KIT
ModEl n
o
:
VS5281
thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
1. SAFETY INSTRUCTIONS
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/
OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2. DESCRIPTION
A time and money saving concise kit of tools and parts for replacing damaged oxygen sensor threads with a new threaded insert.
the kit includes an installation tool, reamer, two taps and five inserts.
Original Language Version
VS5281 Issue: 1 - 27/09/12
© Jack Sealey limited
3. CONTENTS
threaded inserts.
for pack of 5 replacements
quote reference VS5281A
Insertion tool
M20x1.5 tap
M18x1.5 tap
Ø18.60 reamer
