INSTRUCTIONS FOR
EXHAUST EXPANDER SET 3PC
MODEL NO:
VS1668.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9
Use in a suitable, clean and tidy work area, free from unrelated materials. Ensure there is adequate lighting.
8
DO NOT
continue to attempt expanding any pipe that withstands expansion.
8
DO NOT
insert a finger into the expander at any time.
8
DO NOT
allow untrained people to use the expander.
8
DO NOT
allow children to use or play with the expander.
8
DO NOT
use the expander for tasks it is not designed to perform.
8
DO NOT
operate expander if any parts are damaged or missing as this may cause failure and/or personal injury.
8
DO NOT
operate the expander when you are tired or under the influence of alcohol, or intoxicating medication.
8
DO NOT
try and expand exhaust pipes that are not already socketed
and have slits cut away for expansion.
9
Store the expander in a safe childproof place when not in use.
2.
i
INTRODUCTION
Ideal for fitting aftermarket components to standard exhausts.
Used to expand a length of pipe in equal proportions so the pipe is the
same diameter and not tapered. Ensures a perfect fit with no leaks and
also removes dents and clamp marks.
3.
i
SPECIFICATION
4. OPERATION
4.1.
Insert the correct sized exhaust pipe expander into the end of the
pipe (fig.1).
NOTE!
Ensure that at least three quarters of the expander is inserted in the pipe. Failure to do so may result in damage to the expander.
4.2.
Turn the hex drive clockwise to expand the tool and reshape the exhaust pipe (fig.2).
4.3.
When the decided shape is made, wind the tool in the other direction to remove from the exhaust pipe.
8
DO NOT
use an impact wrench or overload the tool.
NOTE!
This tool is not for expanding straight pipe, only for reshaping and widening already socketed pipes.
VS1668.V3 Issue 1 03/04/18
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
Wear protective
gloves
Wear eye
protection
Wear face
mask
Wear protective
clothing
Expander size
Small
Medium
Large
Capacity
Ø29-44mm
Ø40-57mm
Ø54-81
D
rive (Hex)
17mm
17mm
19mm
fig.1
fig.2
