5pc cooling SyStem preSSure teSt Kit
Model no:
VS0033
thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. Safety
Warning!
ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this
equipment.
9
Read instructions thoroughly to ensure safe and effective use.
important!
Read instructions in conjunction with vehicle or equipment manufacturer’s workshop manual.
9
Maintain the apparatus in good condition (use an authorised service agent). Before each use check condition of each component. If any
component is damaged, replace immediately. Use genuine parts only. Unauthorised parts may not function correctly and will invalidate
the warranty.
9
Use in a suitable work area. Keep area free from unrelated materials and ensure that there is adequate lighting.
Warning!
Always wear approved eye (or face) and hand protection when pressure testing.
9
Keep children and unauthorised persons away from the working area.
8
Do not
operate the pressure tester when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
Do not
clean the equipment with solvents or other harsh chemicals.
8
Do not
use the pressure tester for any purpose other than that for which it is designed.
9
When not in use return parts to the case, and store it in a safe, dry, childproof location.
2. introDuction
Capless tester uses cone adaptor system to seal and pressurise the cooling system. Adaptors may be used to replace both screw and bayonet
type cap fittings. Kit includes pump with gauge and four system adaptors for use on a wide range of vehicle applications.
3. Specification
Model no: ...........................................................................................VS0033
nett Weight: ........................................................................................ 2.84Kg
4. contentS
part
Description
VS0033.01
Cone adaptor 17-24mm
VS0033.02
Cone adaptor 28-31.5mm
VS0033.03
Cone adaptor 37-39.5mm
VS0033.04
Cone adaptor 47-48.5mm
VS001.V3-P
Pressure hand pump
VS0033 Issue 2 (HF) 29/04/19
Original Language Version
© Jack Sealey limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
