2.1. Introduction
The SWH189 Automatic Welding Helmet is supplied with an automatic cartridge. With the electronic cartridge
installed solar cells will automatically darken the eye shade when the arc is struck.
2.2. Specification
Light transmittance, automatic cartridge . . . . . . . .Light state - shade 3. Dark state - shade 10
plus optional shade 1 filter . . . . . . .Light state - shade 4. Dark state - shade 11
Operating temperature . . . . . . . . . . . . . . . . . . . .-10
0
C (+14
0
F) to + 70
0
C (+158
0
F).
Helmet material . . . . . . . . . . . . . . . . . . . . . . . . .High-impact plastic, stability of shape up to 220
0
C/428
0
F
UV/IR protection (all cartridge states) . . . . . . . . .Maximum
Auto. response (light to dark @ room temp) . . . .0.8ms
Auto. response (light to dark @ +55
0
C/131
0
F) . . .0.3ms
Auto. response (dark to light) . . . . . . . . . . . . . . .0.2 to 0.3 s
Viewing area . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 x 35mm (3.62 x 1.38)
Cartridge size . . . . . . . . . . . . . . . . . . . . . . . . . . .50.8 x 108 x 5.3mm (2 x 4.25 x 0.21)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.3kg
Energy source . . . . . . . . . . . . . . . . . . . . . . . . . . .Solar cells
01284 757500
E-mail:
01284 703534
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12 months from purchase date. proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address
including your postcode.
Thank you for purchasing a Sealey Safety Product. Manufactured to a high standard
this product will, if used according to these instructions and properly maintained, give you
years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
Declaration of Conformity
We, the sole importer into the UK, declare that the product listed here
is in conformity with the following standards and directives. The construction file for this product is held by
the Manufacturer and may be inspected, by a national authority, upon request to Jack Sealey Ltd.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Safety Products
Signed by Mark Sweetman
16th July 2003
INSTRUCTIONS FOR:
AUTOMATIC WELDING HELMET
Model:
SWH189
1.
SAFETY INSTRUCTIONS
2.
INTRODUCTION & SPECIFICATION
Automatic Welding Helmet
Model SWH189
BS EN 175 : 1997
BS EN 169 : 2002
BS EN 379 : 1994
1.1. GENERAL SAFET
Y
p
p
WARNING!
Ensure the front lens, filter(s) and rear lens are securely in place before use.
p
p
WARNING!
This helmet is not suitable for use when laser or gas welding.
p
p
WARNING! DO NOT
use the helmet if damaged or thought to be faulty. (Contact Service Agent).
p
p
WARNING!
The helmet will not offer protection against mis-use of workshop tools, equipment or accessories.
p
p
WARNING!
The eye protection plate in the helmet is
NOT
unbreakable. Helmet will not protect against
severe impact hazards such as,
(but not limited to),
fragmenting abrasive discs/grinding wheels, stones
and other grinding tools, explosive devices or corrosive fluids.
p
p
WARNING!
The helmet will only protect the eyes and face from radiation and sparks.
7
DO NOT
use helmet unless you have been instructed in its use by a qualified person.
7
DO NOT
open or tamper with the automatic cartridge.
7
DO NOT
get the helmet wet or use in damp or wet locations.
7
DO NOT
leave work area with helmet in lowered position, as bright light source may darken cartridge unexpectedly.
7
DO NOT
place the helmet on a hot surface.
3
Ensure all workshop safety rules, regulations, and conditions are complied with when using welding equipment.
3
Maintain the helmet in good condition and protect cartridge from liquid and dirt contact.
3
Regularly replace the protective front and rear lenses and replace any damaged or worn parts.
Use
genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
3
Fit the helmet and adjust the head band so the helmet will sit as low and near to your face as possible.
3
Use helmet only in temperatures ranging from -10
0
C (+14
0
F) to + 70
0
C (+158
0
F).
3
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3
Keep children and unauthorised persons away from the working area.
1.2. PERSONAL PRECAUTIONS
3
Remove ill fitting clothing, remove ties, watches, rings, and other loose jewellery.
3
Clean helmet (see Section 6) and store in a safe, dry, childproof location.
3
Ensure there is another person within sight close enough to come to your aid should a problem arise when working
s
s
DANGER! If, at any time, the automatic cartridge FAILS to darken when exposed to a welding
arc, DO NOT USE. Remove cartridge and return to your dealer for service/inspection. Continued use of the
product knowing that the auto darkening feature is not functioning may damage your eyes and cause
blindess. Continued use of the helmet which is not functioning will invalidate the warranty and could
prohibit a successful claim on any insurance policy.
SWH189 - 3 - 160703
SWH189 - 3 - 160703
