Original Language Version
6.6.
CLEANING THE AIR/OIL RADIATOR.
6.6.1.
remove upper and lower plastic shrouds to gain access to
inside the compressor.
6.6.2.
Blow compressed air through the radiator, from inside
outwards,making sure that no dirt settles inside the
compressor. (fig.12.)
PROBLEM
POSSIBLE CAUSE
SOLUTION
compressor not starting.
no mains power.
check mains power, including
supply fuses and breakers.
compressor stops,
thermal trip activated.
Excessive air/oil mixture
temperature.
check oil level
check that air/oil radiator is not
blocked.
compressor stops.
motor overheating: motor thermal
relay activated.
check that power supply is correct.
check for loose cable
connections and hot cables
check that motor cooling intake is
not blocked or obstructed.
to resart the compressor:
allow to cool for a few minutes and
press the on/off switch.
7. TROUBLESHOOTING
To reset oil temperature trip: unscrew cap.
Then use pointed object to press trip button,
replace cap.
ssc11003 Issue: 1 - 03/05/13
© Jack sealey Limited
fig.12
fig.13
fig.14
Summary of Contents for SSC11003
Page 9: ......
