background image

6.3. 

Cleaning

6.3.1.  Keep the ventilation grilles clear of dust. Clean with a soft brush regularly.
6.3.2.  Brush sawdust and wood chips from the bed and head regularly.
6.3.3.  Clean the motor housing with a moist, soapy cloth. 

DO NOT

 use abrasive or solvent cleaners.

6.2. 

General Maintenance

6.1.1.  Check all fastenings at regular intervals and tighten if necessary.
6.1.2.  Pay particular attention to the blade screw, ensuring that the nut is tight.
6.1.3.  Lubricate the slides lightly at regular intervals. 
6.1.4.  Check that the blade is perpendicular, as in section 5.3., at regular intervals.

01284 757500

01284 703534

[email protected]

Sole UK Distributor, Sealey Group, 

Kempson Way, Suffolk Business Park

Bury St. Edmunds, Suffolk,
IP32 7AR

www.sealey.co.uk

NOTE: It is our policy to improve products continually and as such we reserve the right to alter data, specifications and component parts without 
prior notice.
IMPORTANT: 

No liability is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, 
taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable) into 
approved containers and dispose of the product and the fluids according to local regulations.

WEEE Regulations

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and 
Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally 
protective way. Contact your local solid waste authority for recycling information.

Parts support is available for this product. To obtain a parts listing and/or diagram, 

please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.

© Jack Sealey Limited

    Original Language Version 

  

SMS216,SMS255     Issue1 - 10/03/16

Summary of Contents for SMS216








Reviews: