• 9 •
Smart Cable LED Behavior
Green LED lit solid
Ready to jump start
Green LED flashes three times Reverse charging protection
Red LED flashes once
Reverse polarity protection
Red LED flashes twice
Short circuit protection
Red LED flashes four times
Low voltage protection
Red LED flashes five times
High temperature protection
Red LED lit solid
OK to press button to jump start
12. SPECIFICATIONS
Internal battery type .......................................... Lithium ion polymer
Charger ................................................100V~240V AC wall charger
Capacity ............................................................8,000 mAh/29.6 Wh
USB output .............................................................5V DC, 2.1A / 1A
Jump start ................................................400A peak/200A cranking
Charging temperature ........................................................0°-50 °C
13. DISPOSAL INFORMATION
13.1 Internal Battery
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains before
removing the battery.
• The battery must be disposed of safely.
Under the Waste Batteries and Accumulators Regulations
2009, Jack Sealey Ltd are required to inform potential
purchasers of products containing batteries (as defined within
these regulations), that they are registered with Valpak’s
registered compliance scheme.
Jack Sealey Ltd’s Batteries Producer Registration Number
(BPRN) is BPRN00705
Environmental Protection
Recycle unwanted materials instead of disposing of them
as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a
manner which is compatible with the environment.
When the product becomes completely unserviceable and
requires disposal, drain off any fluids (if applicable) into
approved containers and dispose of the product and the
fluids according to local regulations.
