background image

1. 

SAFETY INSTRUCTIONS

INSTRUCTIONS FOR:  

AIR TYRE BUFFING KIT

MODEL No: 

 

SA92.V3

ü 

Follow all workshop safety rules, regulations, and conditions when using the buffing kit. 

r

 

WARNING!

 

Disconnect from air supply before changing accessories or servicing.

ü

 

Maintain the

 

buffing kit in good condition and replace       

  any damaged or worn parts. 

Use genuine parts only.  

 

  Unauthorised parts may be dangerous and will  

  invalidate the warranty.

r

 

WARNING!

 Check correct air pressure is maintained

   and not exceeded. We recommend 90psi. 

ü

 

Keep air hose away from heat, oil and sharp edges. 

  Check air hose for wear before each use and ensure

  that all connections are secure.

ü

 

Wear approved safety eye/face shield, ear defenders,  

       and hand protection.

r

 

WARNING! 

Due to the possible presence of asbestos  

  dust from brake linings, when working around vehicle brake systems we recommend you wear  

  suitable respiratory protection. 

ü

 

Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

ü

 

Keep children and non essential persons away from the working area.

û

 

DO NOT use the buffing kit for a task it is not designed to perform. 

r

 

WARNING! DO NOT

 use buffing kit if damaged or thought to be faulty. 

  (Contact Service Agent).

û

 

DO NOT use buffing kit unless you have been instructed in its use by a qualified person.

û

 

DO NOT carry the buffing kit by the air hose, or yank the hose from the air supply. 

û

 

DO NOT operate buffing kit if you are tired or under the influence of alcohol, drugs or    

  intoxicating medication.

û

 

DO NOT carry buffing kit with your hand on the power trigger in order to avoid unintentional  

 starting.

û

 

DO NOT direct air from the air hose at yourself or others.

ü

 

When not in use disconnect from air supply and store in a safe, dry, childproof location.

Original Language Version

SA92.V3      Issue:1 -  15/09/15  

© Jack Sealey Limited

IMPORTANT:

 

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, 

WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT 

IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE 

WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product 

will, if used according to these instructions and maintained properly, give you years of 

trouble free performance.

Read Instruction

Manual

Wear Eye

Protection

Wear Ear

Protection

Summary of Contents for SA92.V3

Page 1: ...igned to perform r WARNING DO NOT use buffing kit if damaged or thought to be faulty Contact Service Agent û DO NOT use buffing kit unless you have been instructed in its use by a qualified person û DO NOT carry the buffing kit by the air hose or yank the hose from the air supply û DO NOT operate buffing kit if you are tired or under the influence of alcohol drugs or intoxicating medication û DO N...

Page 2: ...D and fittings must have the same inside dimensions 3 1 7 Keep hose away from heat oil and sharp edges Check hose for wear and make certain that all connections are secure 3 2 Couplings Vibration may cause failure if a quick change coupling is connected directly to the buffing kit To overcome this connect a leader hose to the buffing kit A quick change coupling may then be used to connect the lead...

Page 3: ...low to dry before use 5 4 For a full service contact your local Sealey service agent 5 5 When not in use disconnect from air supply clean buffer and store in a safe dry childproof location 5 MAINTENANCE NOTE It is our policy to continually improve products and as such we reserve the right to alter data specifications and component parts without prior notice IMPORTANT No liability is accepted for i...

Page 4: ...ude the operator the task and the inserted tool or consumable NB ensure that the length of leader hoses is sufficient to allow unrestricted use as this also helps to reduce vibration The state of maintenance of the tool itself is also an important factor a poorly maintained tool will also increase the risk of Hand Arm Vibration Syndrome Health surveillance We recommend a programme of health survei...

Reviews: