background image

INSTRUCTIONS FOR

AIR OPERATED SANDERS

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.

IMPORTANT:

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,

WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.

SAFETY INSTRUCTIONS

Sole UK Distributor, Sealey Group

Bury St. Edmunds, Suffolk.

01284 757500

E-mail:

[email protected]

01284 703534

01284 757500

E-mail:

[email protected]

01284 703534

NOTE:

It is our policy to continually improve products and as such we reserve the right to alter data, specifications

and component parts without prior notice.

IMPORTANT: 

No liability is accepted for incorrect use of this equipment.

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: 

For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full

name and address, including postcode.

!

WARNING!

Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to 

when using this equipment.

!

WARNING!

Disconnect from air supply (and dust-free system if connected) before changing accessories,

servicing or carrying out maintenance.

"

Maintain the sander in good condition (use an authorised service agent).

"

Replace or repair damaged parts. 

Use recommended parts only. Unauthorised parts may be dangerous and

will invalidate the warranty.

"

Use the sander in a suitable work area and keep area clean, tidy and free from unrelated materials. Ensure that
there is adequate lighting.

"

Before each use check abrasive disc for condition. If worn or damaged replace immediately.

!

WARNING! 

Always wear approved eye or face protection when operating the sander. 

"

If dust is generated, use face, dust or respiratory protection in accordance with COSHH regulations. 

"

Depending on the task, sander noise level may exceed 85dB, in which case wear safety ear defenders.

"

Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain and/or tie back long hair.

"

Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

"

Keep children and unauthorised persons away from the working area.

"

Ensure the workpiece is correctly secured before operating the sander. Never hold workpiece by hand.

"

Check the workpiece to ensure there are no protruding nails, screws, stones, etc.

"

Avoid unintentional starting.

!

WARNING!

Ensure that the correct air pressure is maintained and not exceeded.

"

Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure
that all connections are secure.

"

Prolonged exposure to vibration from these tools poses a health risk. It is the owner’s responsibility to correctly 
assess the potential hazard, issue guidelines for safe periods of use and offer suitable protective equipment.

#

DO NOT use the sander for a task it is not designed to perform.

#

DO NOT operate sander if any parts are damaged or missing as this may cause failure and/or personal injury.

!

WARNING!

DO NOT cut, grind, saw or sand any materials containing asbestos.

#

DO NOT carry the sander by the hose, or yank the hose from the air supply.

#

DO NOT get the sander wet or use in damp or wet locations. 

#

DO NOT use the sander with water. These models are dry sanders only.

#

DO NOT operate sander when you are tired or under the influence of alcohol, drugs or intoxicating medication.

#

DO NOT leave the sander operating unattended.

#

DO NOT carry the sander with your finger on the power lever. 

#

DO NOT direct air from the air hose at yourself or others.

"

When not in use disconnect from air supply (and dust-free system if connected) and store in a safe, dry,
childproof location.

Models:

SA800 & SA801

PARTS LIST

AIR OPERATED SANDERS

Models 

SA800 & SA801

SA800 & SA801 - 1 - 070302

Item Part No.

Description

1

SA800.01

Cover

2

SA800.02

Felt

3

SA800.03

Muffler Body

4

SA800.04

O-ring - SA800 only

5

SA800.05

Cone Muffler

6

SA800.06

Inlet Bushing

7

SA800.07

Spring Pin

8

SA800.08

Lever

9

SA800.09

Snap Ring

10

SA800.10

O-ring

16

SA800.16

Regulator Asm.

18

SA800.18

Rubber Cover

19

SA800.19

Housing

20

SA800.20

Flat Screw

22

SA800.22

Washer

23

SA800.23

Bearing

24

SA800.24

Rear Plate

25

SA800.25

Rotor, 6” Pad

26

SA800.26

Rotor Blade

27

SA800.27

Cylinder

28

SA800.28

O-ring

29

SA800.29

Spring Pin

30

SA800.30

Spring Pin

31

SA800.31

Front Plate

32

SA800.32

Bearing

33

SA800.33

O-ring

34

SA800.34

Guard Bushing

35

SA800.35

Rotor Key

36

SA800.36

Shaft Balancer, 6” Pad

38

SA800.38

Snap Ring

39 SA800.39

Bearing

40 SA800.40

Felt Ring

Item Part No.

Description

41 SA800.41

Bearing Shield

42 SA800.42

Snap Ring

44 SA800.44

Shroud - SA800

45 PTC/150VA 6” Velcro Pad - SA800
46 SA800.46

Spanner

47 SA800.47

Shroud - SA801

48 AK290

6” Velcro Pad - SA801

56 SA801.56

Vacuum Adaptor

58 SA800.58

O-ring

Item Part No.

Description

70 SA800.70

Screw

71 SA800.71

Bearing

72 SA800.72

Shaft

Optional Sanding Pads

- PTC/150A

Stick-on - SA800

- PTC/150SA Stick-on - SA800
- AK289

Stick-on - SA801

Issue No:

1

Date Issued: 070302

Sole UK Distributor, Sealey Group

Bury St. Edmunds, Suffolk.

Reviews: