INSTRUCTIONS FOR:
AIR RATCHET WRENCH REACTIONLESS
3/8” & 1/2” SQ. DRIVE
MODEL NO’S:
SA615, SA616
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION
Follow all workshop safety rules, regulations, and conditions when using wrench.
WARNING!
Disconnect from air supply before changing accessories or servicing.
Maintain the
wrench in good condition and replace any damaged or worn parts.
Use genuine parts only. Non-authorised parts
may be dangerous and will invalidate the warranty.
WARNING!
Check correct air pressure is maintained and not exceeded. We recommend 90psi.
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure that all connections are secure.
Only use impact sockets which are specifically designed for use with a ratchet wrench.
Wear approved safety eye/face shield, ear defenders, and hand protection.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
Keep children and non essential persons away from the working area.
DO NOT
use the wrench for a task it is not designed to perform.
WARNING! DO NOT
use wrench if damaged or thought to be faulty. (Contact Service Agent).
DO NOT
use wrench unless you have been instructed in its use by a qualified person.
DO NOT
expose the comfort grip to excessive heat.
DO NOT
carry the wrench by the air hose, or yank the hose from the air supply.
DO NOT
operate wrench if you are tired or under the influence of alcohol, drugs or intoxicating medication.
DO NOT
carry wrench with your hand on the power trigger in order to avoid unintentional starting.
DO NOT
direct air from the air hose at yourself or others.
When not in use disconnect from air supply and store in a safe, dry, childproof location.
Manufactured with a composite covered handle to help reduce chill and vibration. Features Patented reactionless drive mechanism, which
stops the handle snapping away when tightening bolts preventing wrist injuries. Enclosed ratchet head gives added strength and allows for high
torque reaching up to 75lb.ft (102Nm). Drive shaft is housed by a heat treated alloy steel bushing to reduce wear and extend it’s life. Built-in
torque regulator adjustment. Push down and twist reverse switch. Suitable for the professional workshop.
MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SA615 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA616
Drive size . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8”Sq . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/2”Sq
Max torque . . . . . . . . . . . . . . . . . . . . . 75lb.ft/102Nm . . . . . . . . . . . . . . . . . . . . . . . . . 75lb.ft/102Nm
Free Speed: . . . . . . . . . . . . . . . . . . . . . . . . . .450rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450rpm
Air consumption . . . . . . . . . . . . . . . . . . . . . . . 2.5cfm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.5cfm
Operating pressure. . . . . . . . . . . . . . . . . . . . . . 90psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90psi
Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BSP
Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.38kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.38kg
Noise-Power. . . . . . . . . . . . . . . . . . . . . .106.45dB(A) . . . . . . . . . . . . . . . . . . . . . . . . . 106.45dB(A)
Noise-Pressure. . . . . . . . . . . . . . . . . . . . .95.45dB(A) . . . . . . . . . . . . . . . . . . . . . . . . . . . 95.45dB(A)
Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . .12.86m/s² . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.86m/s²
Uncertainty . . . . . . . . . . . . . . . . . . . . . . . . . .1.77m/s² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.77m/s²
SA615, SA616 Issue: 2(SP) - 21/10/14
Original Language Version
© Jack Sealey Limited
fig.3
Refer to
instruction manual
Wear eye
protection
Wear ear
protection
